PLEASE READ!!!
IF YOUR MODEL IS NOT LISTED, DO NOT BUY IT!
THERE WOULD BE NO RETURNS, REFUNDS NOR EXCHANGES!
Installs on:
AK-74, AK, AKM, AKS, AKMS, WASR-10 (There were various variants of WASR-10 made.Some models may require some fitting)
SLR-107R,
SLR107R,
SLR107R-11E,
SLR107R-12,
SLR105,
SLR106.
Kalashnikov USA KR-103
ATTENTION: THESE HANDGUARDS ARE MADE BASED ON SOVIET DESIGN.
CERTAIN MANUFACTURERS MAY STILL REQUIRE SOME FITTING.
PLEASE CONFIRM THE FITMENT WITH YOUR FIREARM MANUFACTURER!
Handguard comes with 3 picattiny rails.
TECHNICAL SPECIFICATIONS:
MANUFACTURER – GUN POWER NATION.
COUNTRY OF MANUFACTURE – UKRAINE.
OVERALL DIMENSIONS – 433x46x72 MM.
MATERIAL – 7075 ALUMINUM ALLOY, STEEL.
WEIGHT – 691 G.
WEAPON MODEL – AKM/AKMS, AK-74, MK-72, SAIGA CARABINERS.
MANUFACTURING METHOD – MILLING.
PROTECTIVE COATING – ANODIZING OR CERAKOTE CERAMIC PAINT.
EQUIPMENT:
PRODUCT DESCRIPTION:
The short barrel with cover “AA-11.00.000” consists of a body, a cover, a receiver cover, and a rotating mechanism. The body has a solid milled base, rear mounting, and a crescent. The rear mount is connected to the base with three M4 threaded screws with countersunk heads. The crescent is located inside the base and is attached to it with two M4 threaded screws with countersunk heads and two threaded inserts that ensure a secure connection. The crescent is adjustable, which allows the front sight to be installed on any carbine of this type.
The overlay is made of solid milled aluminum metal. A Picatinny rail is located in its upper part. The overlay is connected to the body with M4 threaded countersunk screws.
The receiver cover consists of a body made of solid aluminum bar and a clamping mechanism. The mechanical clamp includes a metal frame, an adjustment wheel, a guide screw, and an M5 set screw (guzhon). The frame is located inside the rear part of the cover and is attached to it with a guide screw with an M5 thread and an M3 set screw, which is screwed into the right side of the cover housing and acts as a stopper, preventing it from detaching from the cover. The frame is moved by an adjustment wheel attached to the other side of the guide screw.
The M5 set screw is screwed in parallel to the guide screw and prevents the adjustment wheel from unscrewing on its own because the ball of the screw fits into the grooves on the wheel. The front part of the cover is cone-shaped, which provides additional self-locking attachment to the weapon.
The rotating mechanism consists of an adapter bracket, which is attached to the receiver cover with two screws, two mirror plates, which are attached to the cover, two bushings, and two screws that hold the mechanism together. Inside the adapter bracket, there are two grooves in which springs are placed.
INSTALLATION VIDEO.
